Elementric Dripspy mat

Description

Elementric’s leakage and temperature sensor, the Dripspy, comes with an external sensor cable. Detects early leaks and sends notifications and SMS directly to your phone. Temperature alarm warns below 10 °C. Easy to install – no tools required. The Dripspy has a built-in retry mechanism that ensures the device’s status is reported to the server and notified in the app. The base heartbeat interval is 2 hours, and every device message is followed by a server acknowledgment. WiFi device has a retry mechanism that ensures the device’s status is reported to the server and notified in the app. The base heartbeat interval is 12 hours, and every device message is followed by a server acknowledgment. Integration with Elementric app Elementric’s free app: receive alerts, view history, share warnings with your family, and monitor temperature changes. Dimensions: 70 x 350 mm WiFi specifications: Maximum WiFi power: 20.5 dBm WiFi frequency range: 2412 – 2484 MHz Configurable via Bluetooth Maximum Bluetooth RF power: 9 dBm Power supply: 2 x AAA batteries Supply voltage: 3 V Battery capacity: 2000 mAh Estimated battery life: +4 years Operating range: 5 – 60 °C Maximum humidity: 80 % Communication protocol: CoAP, IEEE 802.11 b/g/n Operating modes for the Drop Mat: The device operates in two modes: Factory and Configured. In Factory mode, the LED blinks blue, and the device is ready to be configured. If configuration is successful, the LED blinks green. In case of an error during configuration, the LED blinks alternately blue and red. When successfully configured, the device enters Configured mode. It is possible to reset the device to Factory mode by holding down the user button for 5 seconds or until the blue LED lights up. Once in Configured mode, the device starts sensing for water. Leaks are indicated by a blinking orange LED. Momentary button press, indicated by a green LED blink, reports the device state and updates the app. The device periodically sends messages with its current status. Communication errors are indicated by short red LED blinks. Low battery is indicated by long and infrequent red LED blinks. Processor – Semtech STM32WL5x (based on Cortex-M4 core) Compact size – dimensions 130 x 500 mm, perfect for tight spaces. With Dripspy, property owners can significantly reduce water damage costs, increase tenant safety, and simplify operations through seamless digital monitoring.