Product
SG100-H2S ONLINE GAS DETECTOR
SG100-H2S gas detector is an intelligent hot-pluggable fixed gas detector, which is easily for maintenance after installation and continuous monitoring of toxic gases, oxygen, flammable gases.
Description
SG100-H2S gas detector is an intelligent hot-pluggable fixed gas detector, which is easily for maintenance after installation and continuous monitoring of toxic gases, oxygen, flammable gases. With IECEx, ATEX certifciates, explosion level reaches Ex db IIC T6 GB/E x db ia IIC T6 G B/Ex da db ia IIC T6 GB. Having a 3-wire 4 to 20 mA analog output with relays, it also offers HART, RS485 Modbus protocol, making it compatible with most control systems. Adopt magnetic wand design, it’s safe and easy to do menu navigation in explosion areas. Wall mounted type, installed on the wall directly, real time monitoring Piping type, installed on the pipeline, monitoring the gas concentration inside Flow type, connected with external sampling pump and tube, measure the gas concentration in enclosed space. Die-cast aluminum case, strong and durable; Stainless steel case is available for choose, meeting the demand of different situations
Need a tailored offer?
H2S
0-100, 0-500
Solutions
Sub-categories
Frequently Asked Questions
- How do I succeed with my LoRaWAN project?
- Start by defining your use case, required sensor types, and coverage area. Verify that your chosen devices support the LoRaWAN class (A, B, or C) that fits your application — Class A for battery-powered sensors, Class C for always-on actuators. Make sure you have gateway coverage in your area — use a LoRaWAN field tester to verify signal strength and connectivity before deploying your devices. All devices in our catalogue are pre-certified for seamless integration with the Sensor-Online platform, which handles device provisioning, data routing, and visualization out of the box.
- How do I succeed with my wM-Bus project?
- wM-Bus (Wireless M-Bus) is the standard protocol for utility metering — water, heat, gas, and electricity. Key steps: select a compatible wM-Bus gateway or receiver, verify the transmission mode (T1, C1, or S1) supported by your meters, and confirm that your software can parse the meter telegrams. Our catalogue includes certified wM-Bus devices and gateways that integrate directly with the Sensor-Online platform, giving you a complete path from meter to dashboard.
- Does the product work with the Sensor-Online platform?
- Yes. All products in our catalogue are certified and tested with the Sensor-Online IoT platform. They support MQTT and REST API for straightforward integration, and configuration is done directly in the platform's web interface — no external software required. The devices also support Node-RED and n8n for advanced automation logic.
- Can I integrate the product with my existing system?
- Most of our products communicate via standard protocols such as MQTT, Modbus, HTTP/REST, or LoRaWAN, enabling integration with most SCADA, BMS, and ERP systems. We also offer custom integrations via our API. Contact us if you have a specific system you need to connect.
- Do I need programming skills to set up the device?
- No. Basic installation and configuration is done through the Sensor-Online web portal without any coding. For advanced automation flows using Node-RED or n8n, some technical understanding is helpful — but we provide ready-made flow templates and guides for the most common scenarios.
